Leica SPIDER GR30 User Manual page 46

IF the
RT out data
stream LED
RT in data stream
LED
Position LED
Bluetooth LED
46
is THEN
red Active logging sessions are configured but
the SD card is full or no satellites are tracked.
☞
Recommended user action:
Check the SD card and the tracking
status.
off No active data stream is configured or power
is off.
green One or more data streams are configured
and active. Data is being streamed.
red Data streams are active but no data is
streamed.
☞
Recommended user action:
Check that data is tracked and a
navigated position is available.
Check that the correct reference
position is entered.
off No active real-time in data stream or power
is off.
green A real-time in data stream is configured and
active, data is received and a fixed position is
available.
flashing A real-time in data stream is configured and
green active, data is received, a DGPS position is
available.
yellow A real-time in data stream is configured and
active, data is received but no fixed or DGPS
position is available.
red Incoming data streams are active but no data
is received.
OR
Incoming data stream is configured and
active but the instrument is not tracking sat-
ellites and/or no position is available.
☞
Recommended user action:
Check that the incoming data con-
nection is set up correctly. Check
the tracking and position of the
instrument.
off The instrument is switched off.
flashing The instrument is tracking satellites but no
green position is available.
green A navigated position is available.
red No satellites are tracked and no navigated
position is available.
off No Bluetooth wireless signal (not configured
or no connection established).
GR50 User Interface