Working With The Memory Device - Leica SPIDER GR30 User Manual

7.3
☞
☞
Insert and remove an
SD card into instru-
ment step-by-step
58

Working with the Memory Device

Keep the card dry.
•
Use it only within the specified temperature range.
•
• Do not bend the card.
Protect the card from direct impacts.
•
WARNING
The SD card must not be removed while the instrument is writing data to the
card. To remove the SD card safely, turn off the instrument beforehand.
WARNING
Ensure that the instrument is off before inserting the SD card. Switching on the
instrument will ensure the necessary folder structure is available on the SD
card.
Failure to follow these instructions could result in data loss and/or permanent
damage to the card.
1
011647_001
Step Description
☞
The SD card is inserted into a slot inside the SD card/USB port cover
on the front of the instrument.
1. Loosen the screw on the SD card/USB port cover.
2. Open the SD card/USB port cover.
3. Place the SD card into the slot. The card should be held with the
contacts downwards and facing the slot.
☞
Do not touch the contacts.
4. Slide the card firmly into the slot until it clicks into position.
5. To remove the SD card, gently press inwards on the card to release it
from the slot.
6. Place the SD card/USB port cover back over the slot and tighten the
cover screw.
3
2
5
Operation