6.3
Setup in a non-DHCP
network
Equipment Setup
Setup in a Non-DHCP Network
If the instrument is setup in a non-DHCP network, the web interface can still
be accessed using a crossed Ethernet cable.
Setup for Windows XP
Step
Description
1.
Start the computer.
2.
Connect the crossed Ethernet cable to the computer and the Ether-
net port on the back of the GR30/GM30/GR50.
3.
Turn on the GR30/GM30/GR50.
4.
On the computer go Start / Control Panel / Network Connec-
tions.
5.
Select the Network connection used with the crossed Ethernet cable,
right click and select Properties.
6.
In the General tab, highlight Internet Protocol and press Proper-
ties
7.
Select Use the following IP address and enter
IP address: 192.168.0.1
•
Subnet mask: 255.255.255.0
•
51