5.3
Filter cartridge replacement (only on XM 20T JC)
Warning!
Wear appropriate PPE (dust mask, latex gloves, goggles, etc.).
Proceed as follows to replace the filter:
-
Switch the vacuum cleaner off
-
Disconnect the vacuum cleaner from the electricity supply
-
Unlock the closing hooks on both sides
-
Remove the head
-
Remove the HEPA Filter (if provided)
-
With the help of a second person, hold the JetClean® cleaning system disk lid open, take the
disk lid (D) fastening screws out, then, remove the fastening screws and the spring (E) at the
junction of the JetClean® system and the chamber (F) support.
Pag. 33 di 44