4.2
Operation cycle
Ensure that the power cord is intact and in perfect state.
Warning!
Before inserting the plug, ensure that the voltage of the power supply line
corresponds to that indicated on the vacuum's identification plate.
-
Ensure that the power plug is inserted into the socket correctly.
-
Make sure the flexible pipe is properly inserted and tightened in the special inlet.
-
Ensure that the dirt collecting container is in the proper position and locked in place under the
vacuum's chamber
-
Secure the vacuum cleaner using the brake on the rotating wheel, as shown in the figure.
Hold the end of the flexible hose with the chosen vacuum accessory.
To start using the vacuum cleaner turn the switch (1) to "I",
To interrupt the vacuuming turn the switch (1) to "O".
Pag. 24 di 44