Residual Risks; Applied Directives - DEPURECO XM 20T Series Instruction And Maintenance Manual

Table of Contents

Advertisement

2.4

Residual risks

DEPURECO recommends complying with the instructions, procedures and recommendations in this
manual and with the safety standards in force. DEPURECO also recommends using suitable personal
protective equipment as well as the protection devices integrated in the vacuum.
The residual risks analysed on the vacuum and/or its components could be:
Electrical risks during maintenance due to the requirement to work on live parts
Pursuant to Italian Legislative Decree 81/08 – articles 80 to 87 – it is prohibited to operate on live parts,
notwithstanding the exceptions set forth by said Legislative Decree.
Risks associated with incorrect use in presence of explosive and inflammable liquid substances
The vacuum must not be used in environments containing liquid substances or liquids that can
evaporate at room temperature, inflammable powders and gas.
Risks related to operation in humid environments
Respect the limitations indicated in this manual, in section 1.5 "Authorised environmental conditions".
Risk of incorrect interpretation of the safety pictograms
With reference to risk analysis and identification, DEPURECO has installed hazard labels on the
vacuum, in compliance with the standards concerning graphical symbols.
The user must immediately replace any safety plate rendered illegible due to wear or damage.
Warning!
The removal of safety plates from the vacuum and/or its components and packaging is
strictly prohibited.
DEPURECO shall not be held liable for the vacuum's safety in the event of failure to
comply with this prohibition.
2.5

Applied Directives

The following directives apply to the vacuum cleaner described in this manual:
2006/42/EC Machinery Directive
-
2014/30/EU
-
2011/65/EU - ROHS - Directive on the restriction of the use of certain hazardous substances
-
in electrical and electronic equipment
2014/35/UE – Low tension directive
-
2014/34/UE – ATEX Directive
-
The reference standards, including their binding requirements, are managed within the DEPURECO
Quality Management System and archived by DEPURECO.
Electromagnetic compatibility directive
Pag. 17 di 44

Advertisement

Table of Contents
loading

This manual is also suitable for:

Atex z22 ii3dXm 20t m z22Xm 20t m z22 jcXm 20t t z22 jcMiniair z22Miniair series

Table of Contents