4.3
Filter cleaning (only on XM 20T JC)
To clean the filter cartridge, the vacuum cleaners belonging to the XM 20T family, in the "JC" model, are
equipped with the JetClean® cleaning system.
The system works due to the difference in pressure between the internal atmosphere and the external
atmosphere leading to the dust becoming detached from the filtering fabric of the cartridge, without
needing to switch the vacuum cleaner off.
The system is made up of a disk lid on the filter chamber and a shutter situated on the inlet.
Proceed as follows to clean the filter:
-
With the vacuum cleaner turned on, lift the shutter (detail no. 7, chap. 1.2) on the inlet
-
Open the JetClean® valve for a few seconds (detail no.3, chap. 1.2), and repeat this operation a
couple more times. For greater efficiency of the cleaning system, switch both motors on
Pag. 26 di 44