Troubleshooting - DEPURECO XM 20T Series Instruction And Maintenance Manual

5.6

Troubleshooting

FAULT
DETECTED
The vacuum cleaner will
not start
Irregular vacuum values
Excessively noisy motors
POSSIBLE
CAUSE
- No power supply
Switch
- Clogged filter
- Clogged hose
- Motor fault
Pag. 38 di 44
SOLUTION
RECOMMENDED
- Check for the presence of
voltage in the socket
- Check the condition of the plug
and the power cable
- Contact DEPURECO technical
assistance
- Follow filter cleaning procedure.
If this solution is not effective,
replace it.
- Check the hose and clean it.
- Contact DEPURECO technical
assistance