6.2
Navigating the menu structure
Use the push button to navigate between the following menu items:
Table 6- 3
Menu items
Menu
Menu 1
Menu 2
Menu 3
Menu 4
Menu 5
6.3
Start-up routine
1. Power-up device.
2. Reset battery status indicator as described below (battery-powered versions only).
Resetting the battery counter
Note
The reset can also be carried out via SIMATIC PDM.
When new batteries are installed and the plug is connected, the transmitter start-up routine
begins. The display shows the active software version, e.g. 2.03.
After ten seconds the message "reset.bat" will appear.
SITRANS FUS080 transmitter
Operating Instructions, 07/2012, A5E03059912-02
Parameter
Flow volume totalizer 1
Flow volume totalizer 2
Actual flow rate
Alarm codes
Display test
Display example
Commissioning
6.2 Navigating the menu structure
Comments
Factory preset is forward
volume flow.
The battery symbol shows
full.
Factory preset for reverse
flow.
Negative values indicate
reverse flow calculation.
Negative values indicate
reverse flow calculation..
Each code refers to a
specific alarm.
Check of all segments.
Display toggles between all
segments on/off.
31