Siemens SITRANS FUS080 Operating Instructions Manual page 41

4. Click on "Apply pipe geometric settings" and then on "OK" to transfer the data into
SITRANS FUS080 transmitter
Operating Instructions, 07/2012, A5E03059912-02
Figure 6-3 2-path sensor data
appropriate "Value" and "Unit" cells. Values are transferred and shown in metric units
only. Close the pipe geometric tool dialog box by clicking on "OK". Click "OK" to confirm
the data entered.
Figure 6-4 Changed values successfully transferred
Commissioning
6.4 Commissioning via PDM
39