Output - Siemens SITRANS FUS080 Operating Instructions Manual

A.2

Output

Table A- 2 Output parameters
Modbus Parameter
Address
43023 100 Actual date and time
43006 101 Totalizer 1
43010 102 Totalizer 2
43014 103 Customer totalizer 3
19 104 Reset customer totalizer 3
40732 105 Customer totalizer 3 reset
date
43001 106 Flow rate
43136 107 Relative flow rate
43035 108 Actual velocity for path 1
43046 109 Actual velocity for path 2
43026 110 Path 1 gain step
43037 111 Path 2 gain step
Pulse A B
40817 430 Output A enable
40818 431 Pulse A function
40819 432 Amount per pulse A
40821 433 Pulse width for pulse A
40822 440 Output B enable
40823 441 Pulse B function
SITRANS FUS080 transmitter
Operating Instructions, 07/2012, A5E03059912-02
Default Value range
value
Product
dependent
0 -2000000001
...
+2000000001
0 -2000000001
...
+2000000001
0
No No, Yes
last reset dd-mm-yyyy,
date hh:mm:ss
0
0
0
15 1 to 15
15 1 to 15
Yes No, Yes
Forward Forward,
Reverse,
Forward net,
Reverse net
1.000000 0.000001 ...
(m ) 1000000000
3
5 ms 5, 10, 20, 50,
100, 200, 500
ms
Yes No, Yes
Alarm Pulse, Alarm,
Call up
Access Description
level
R/W Actual date and time (day-month-
year and hours:minutes:seconds)
Read Volume for totalization register 1
Read Volume for totalization register 2
Read Customer totalizer 3 based on
totalizer 1 set up
R/W Reset of customer totalizer
Date and time when customer
totalizer has been reset
Read Actual flow value
Read Actual flow value in relation to Qmax
Read The actual flow velocity for path 1 in
m/s (SI-unit)
The actual flow velocity for path 2 in
m/s (SI-unit).
Valid for 2-path solutions only
Read Amplifier setting when measuring
path 1
Read Amplifier setting when measuring
path 2.
Valid for 2-path solutions only
R/W Select 'Yes' to enable output A
R/W Pulse output calculation on pure
forward flow or pure reverse flow -
or net flow for forward and reverse
pulse flow.
Valid if pulse output A is enabled
R/W Volume per pulse and selected unit
Valid if pulse output A is enabled.
R/W Pulse length when the pulse is
active.
Valid if pulse output A is enabled
R/W Select 'Yes' to enable output B
R/W Configuration of output B as pulse -
alarm or call up function.
Valid if pulse output B is enabled
Parameter lists
A.2 Output
71