Factory Settings For Modbus Communication - Siemens SITRANS FUS080 Operating Instructions Manual

Settings
B.2 Factory settings for MODBUS communication
Totalizer directions
Totalizer 1 direction
Totalizer 2 direction
Digital output 1
Active
Direction
Amount per pulse
Pulse width
Digital Output 2
Active
Function
Direction
Amount per pulse
Pulse width
B.2

Factory settings for MODBUS communication

Parameter
Slave device address
Data transmission rate
Vertical parity position
Response timeout
Response delay
Interframe space
The settings can be changed via SIMATIC PDM or via the MODBUS.
84
Forward
Reverse
On
Forward
0.1m
3
5 ms
On
Alarm
No influence, while "Alarm"
No influence, while "Alarm"
No influence, while "Alarm"
Forward
Reverse
On
Forward
0.1 m
3
5 ms
On
Alarm
No influence, while "Alarm"
No influence, while "Alarm"
No influence, while "Alarm"
Default setting
1
19 200
E-8-1 (0 - even)
10000 ms
1 ms
35
Operating Instructions, 07/2012, A5E03059912-02
Forward/Reverse/Forward
net/Reverse net
Forward/Reverse/Forward
net/Reverse net
On/off
Forward/Reverse/Forward
net/Reverse net
Unit: The same as Totalizer
unit
Value freely selectable
5, 10, 20, 50, 100, 200, 500
ms
On/off
Pulse/Alarm/Call up
Forward/Reverse/Forward
net/Reverse net
Unit: The same as Totalizer
unit
Value freely selectable
5, 10, 20, 50, 100, 200, 500
ms
SITRANS FUS080 transmitter