Options - Toshiba BV410D-GS02-QM-S Owner's Manual

 Options
The following options are available from your nearest Toshiba Tec Corporation representative or Toshiba Tec
Corporation Head Quarters.
<BV410D>
Option Name
Cutter module (White)
Peel-off module (White)
External media stand
Wireless LAN kit
Bluetooth interface kit
Serial (RS-232C) I/F board
AC adapter cover (White)
<BV420D>
Option Name
Cutter module (Black)
Peel-off module (Black)
External media stand
Wireless LAN interface kit
Bluetooth interface kit
Serial (RS-232C) I/F board
AC adapter cover (Black)
44 15. Printer Specifications
Type
BV214-F-QM-S
BV214-P-QM-S
BV914-H-QM-S
BV904-PH-QM-S
BV700-WLAN-QM-S
BV700-BLTH-QM-S
BV700-RS-QM-S
BV914-ACD-QM-S
Type
BV224-F-QM-S
BV224-P-QM-S
BV924-H-QM-S
BV904-PH-QM-S
BV700-WLAN-QM-S
BV700-BLTH-QM-S
BV700-RS-QM-S
BV924-ACD-QM-S
Description
A cutter module that fully cuts (separates) the printed
media.
A cutter module that partial cuts (dose not fully
separate) the printed media.
This module enables the printer to strip the backing
paper from the print labels and present the striped
labels on-demand (one by one) by detecting the
presence or removal of a label from the peel bar.
When this option is attached to the printer, a media
with an outer roll diameter up to 214 mm (8.4") and
inner core diameter of 76.2 mm (3") can be used.
This interface kit enables wireless LAN (WLAN)
communication.
This interface kit enables Bluetooth communication.
This interface kit enables Serial (RS-232C)
communication.
Attached to the printer bottom for housing the AC
adapter
Description
A cutter module that fully cuts (separates) the printed
media.
A cutter module that partial cuts (dose not fully
separate) the printed media.
This module enables the printer to strip the backing
paper from the print labels and present the striped
labels on-demand (one by one) by detecting the
presence or removal of a label from the peel bar.
When this option is attached to the printer, a media
with an outer roll diameter up to 214 mm (8.4") and
inner core diameter of 76.2 mm (3") can be used.
This interface kit enables wireless LAN (WLAN)
communication.
This interface kit enables Bluetooth communication.
This interface kit enables Serial (RS-232C)
communication.
Attached to the printer bottom for housing the AC
adapter