Removing Jammed Media - Toshiba BV410D-GS02-QM-S Owner's Manual

LED
POWER ONLINE
ON OFF
 Removing jammed media
Do not use any tool that may damage the print head.
When media jamming occurs, please remove jammed media from the printer as following procedure.
1 Turn the power off.
Open the top cover and remove the media roll.
2
Remove the jammed media from the printer. DO NOT USE any sharp implements or tools as these
3
could damage the printer.
Clean the print head and platen, then remove any further dust or foreign substances.
4
Load the media again, and close the top cover.
5
ERROR
ON 11. An improper command such as a print command has been received
while the firmware is being upgraded in the download mode.
12. When any abnormal operations as below are performed, a system
error occurs.
(a) Command fetch from an odd address.
(b) Access to the word data from a place other than the boundary of the
word data.
(c) Access to the long word data from a place other than the boundary of
the long word data.
(d) Access to the area of 80000000H to FFFFFFFFH in the logic space in the
user system mode.
(e) Undefined command placed in other than the delay slot has been
decoded.
(f) Undefined command in the delay slot has been decoded.
(g) Command to rewrite the delay slot has been decoded.
Printer status
14. Troubleshooting 41