1. Product Overview
Introduction
Thank you for purchasing our barcode printer. This Owner's Manual contains valuable information such as the general
setup and how to confirm the printer's operation using test prints. Read this carefully to help you to gain maximum
performance and life from your printer. Be sure to keep this manual close at hand for daily reference.
For further information concerning this manual, contact your Toshiba Tec Corporation representative.
Features
This printer has the following features:
Interfaces
Easy to use
Flexible hardware
Full range of options
Unpacking
Unpack the printer.
1
Check that there are no scratches on the printer or any other damage to it.
2
Toshiba Tec Corporation shall have no liability for any damage or anything similar sustained during
transportation.
Keep the carton and internal packing materials for future transportation of the printer.
3
A USB port and Ethernet support interface are embedded in this printer
as standard. Wireless LAN, Bluetooth and serial interface (RS-232C) can
also be embedded as an option.
The printer mechanism is designed to allow simple operation and easy
access to maintenance.
Sharp and clear printing can be achieved by an 8-dot/mm (203 dpi)
print head (in BV410D-GS02-QM-S and BV420D-GS02-QM-S) at a speed
of up to 177.8 mm/sec. (7"/sec.) or an 11.8-dot/mm (300 dpi) print head
(in BV410D-TS02-QM-S and BV420D-TS02-QM-S) at a speed of up to 127
mm/sec. (5"/sec.).
The following optional devices can also be installed in this printer.
Cutter module
Peel-off module
External media stand
Wireless LAN interface
Bluetooth interface
Serial (RS-232C) interface
AC adapter cover
1. Product Overview 11