External Media Stand (Option) - Toshiba BV410D-GS02-QM-S Owner's Manual

Do not squeeze the media too much with the media guides. Otherwise, the media will bend and this may cause
jamming or misfeeding.
Close the top cover.
3
For details, refer to  P.25 "9. Opening and Closing the Top Cover".
 External media stand (Option)
If the roll diameter exceeds 127 mm (5") and the inner core diameter is 76.2 mm (3"), the External media stand
(option) is required.
Install the External media stand [1] in the foot at the bottom of the printer.
1
Insert the media shaft [2] into the core of the media roll [3].
2
Insert the media shaft [3] into the slot [4] on the External media stand.
3
4 Insert the leading edge of the media into the paper slot [5] of the printer.
[ 1 ]
[ 3 ]
[ 2 ]
[ 3 ]
[ 4 ]
[ 5 ]
12. Print mode 33