1. PRODUCT OVERVIEW
1.6 Options
Option Name
Disc cutter module
Peel Off module
Fanfold paper guide
RFID module
Expansion I/O interface
card
Parallel interface card
Serial interface card
Wireless LAN interface
card
NOTE:
To purchase the optional kits, please contact the nearest authorised TOSHIBA TEC representative or
TOSHIBA TEC Head Quarters.
ENGLISH VERSION
Type
B-EX206-QM-R
B-EX906-H-QM-R
B-EX906-FF-QM-R
B-EX706-RFID-U4-EU-R
B-EX706-RFID-U4-US-R
B-EX706-RFID-U4-AU-R
B-EX700-IO-QM-R
B-EX700-CEN-QM-R
B-EX700-RS-QM-R
B-EX700-WLAN2-QM-R
Disc cutter
To perform a cut the media feeds to the cut position,
stops and is cut , then back feeds to the print position
This eanables on-demand (peel-off) operations.
Installing this module enables read and write of
UHF RFID tags.
Note
GS/TS12-CN-R do not support the RFID option I/F.
(Please purchase the GS/TS18-CN-R whenRFID is
needed.)
Installing this card in the printer allows connection to an
external device with the exclusive interface.
Installing this card provides a Centronics interface port.
Installing this card provides an RS-232C interface port.
Installing this card provides Wireless LAN
Communication.
Note:
GS/TS12-CN-R do not support theWLAN option I/F.
(Please purchase the GS/TS16-CN-R when WLAN I/F is
needed.)
E1- 5
Description
1.6 Options