A1.2 Options; A1.3 Media; A1.3.1 Media Type - Toshiba B-SV4D Series Owner's Manual

APPENDIX 1 SPECIFICATIONS

A1.2 Options

Option Name
Keyboard display unit
Cutter module
Strip sensor
Memory module
External media roll hanger B-SV904-PH-QM-R
LAN adapter
NOTE:
The above options are available from your nearest TOSHIBA TEC representative or TOSHIBA TEC Head Quarters.

A1.3 Media

Please make sure that the media to be used is approved by TOSHIBA TEC. The warranties do not apply to
problems caused by using media that is not approved by TOSHIBA TEC.
For information regarding TOSHIBA TEC-approved media, please contact a TOSHIBA TEC authorised
representative.

A1.3.1 Media Type

This direct thermal printer is specifically designed for thermal media. The table below shows the size and shape
of the media that can be used on this printer.
Type
KB-75-QM-R
B-SV204-QM-R
B-SV404-QM-R
B-SV904-H-QM-R
B-SV704-E1M-QM-R (1MB)
B-SV704-E2M-QM-R (2MB)
B-SV704-E3M-QM-R (3MB)
B-SV704-E4M-QM-R (4MB)
B-SV704-E6M-QM-R (6MB)
B-SV704-E8M-QM-R (8MB)
B-SV704-LAN-QQ-R
(For AC100 to 120V)
B-SV704-LAN-QP-R
(For AC200 to 240V)
Label
Black Mark
(on reverse side)
This module is an external intelligent keyboard
display unit.
A cutter unit that makes stub cuts.
A cutter unit that makes normal cuts.
When attached to the front of the Media Outlet,
this sensor allows the on-demand strip issue by
detecting the presence or lack of a label.
A flash ROM memory PC board
When this option is attached to the printer, a
media roll with an outer roll diameter exceeding
127 mm (5") can be used.
This option enables the printer to be used in a
LAN network.
Cut position
Feed Direction
EA1- 2
ENGLISH VERSION EO1-33061
Description
Tag paper
Black Mark
(on reverse side)
A1.2 Options