Table of Contents
Advertisement
APPENDIX 1 SPECIFICATIONS
A1.2 Options
Option Name
Cutter module
NOTE:
Cleaning is required to keep printer and cutter life after 1 roll is printed or the end of day.
The above options are available from your nearest TOSHIBA TEC representative or TOSHIBA TEC Head Quarters.
A1.3 Media
Please make sure that the media to be used is approved by TOSHIBA TEC. The warranties do not apply to
problems caused by using media that is not approved by TOSHIBA TEC.
For information regarding TOSHIBA TEC-approved media, please contact a TOSHIBA TEC authorised
representative.
A1.3.1 Media Type
The table below shows the size and shape of the media that can be used on this printer.
Cut position
Issue mode
Item
Label width
Label length
Thickness
Max. outer roll diameter
Roll direction
Inner core diameter
NOTES:
1. To ensure print quality and print head life use only TOSHIBA TEC approved media.
2. A label jam is more likely to occur with the approach of label end because labels around the paper core curl
intensely..
Type
B-EV204-LC-QM-R
Linerless Label
25.0mm to 152.4mm (1.0" to 6" )
25.4mm to 38.1mm (1" to 1.5"), 1.5" is recommended
EA1- 2
Description
Guillotine cutter for Linerless label.
Feed Direction
Linerless Cut mode
102mm (4.0")
0.009mm (0.0035")
Ø127mm (5")
Outside wound
ENGLISH VERSION EO1-33095
A1.3 Media
Unit: mm (inch)
(See NOTE 2.)
Advertisement
Table of Contents
