Displaying Disk Information - Adaptec RAID 21610SA Installation And User Manual

Displaying Disk Information

The CLI enables you to monitor or manage disk attributes, prepare
a disk for use by a controller, and detect defects using the following
CLI commands:
I
disk list
Disk Attribute
device ID
device type
removable media
vendor ID
product ID
revision number
number of blocks
bytes per block
disk usage
shared channel
Example of disk list:
AAC0> disk list
Executing: disk list
C:ID:L Device Type Blocks
------ ----------- -------- ----------- ----------- ------
0:01:0 Disk
0:02:0 Disk
I
disk show defects
Disk Attribute
disk defects
Indicates...
An ID number assigned to each device attached to a
channel
Whether the device is a disk, printer, scanner, and so
on
Whether the media is removable (floppy disk or
CD-ROM, for example)
Name of a device vendor
Device model number
Device revision number
Total number of disk block available on a device
Number of bytes for each block
Either MS-DOS, Initialized, Not Initialized, Offline, or
Unknown
N/A
Bytes/Block Usage
17783240 512
17783240 512
Indicates...
Total number and location of primary defects
I
(defects that originate during manufacturing)
Total number and location of grown defects (defects
I
that originate after manufacturing)
Command Line Interface (CLI)
Shared
Initialized NO
Initialized NO
C-11