Container (Array) Commands - Adaptec RAID 21610SA Installation And User Manual

open [/readonly={boolean}] [/domain={string}] {string}
Opens a controller for access by the CLI. The controller must be
open before any command can be targeted at that controller.
Parameters
{string}—Computer name and the controller to open.
Switches
/readonly—If TRUE, the controller is opened for read-only
access. (The default is FALSE.) If you open a controller with
read-only access, you can use only the commands that do not
change the controller configuration.
/domain (Windows only)—Domain (local or a trusted domain) in
which the computer that contains the controller resides. If not
specified, the CLI assumes the local domain.
reset_window
Linux/UNIX only—Resets the window.

Container (Array) Commands

Before working with arrays, you must have previously opened the
controller. In addition, you must have initialized your disks to
prepare for array operations.
The following commands are used to display, create, and manage
arrays.
container add_level {container}
Creates a multilevel volume array which contains the array as
its only element.
Parameters
{container}—ID of the array to convert to a multilevel volume.
container clear [/always={boolean}] [/wait={boolean}]
{container}
Clears the array.
Parameters
{container}—ID of the array to clear.
Command Line Interface (CLI)
C-16