Using The Scripting Features - Adaptec RAID 21610SA Installation And User Manual

Deleting Arrays
!
Caution: Back up the data on an array before you delete it. All
data on the array is lost when you delete the array, and you
cannot restore a deleted array.
To delete an existing array:
1 Select Manage Arrays from the Main menu.
2 Select the array you want to delete and press Delete.
3 From the Array Properties dialog box, press Delete again and
then press Enter. The following message is displayed:
Warning!! Deleting will erase all data from the array.
Do you still want to continue? (Yes/No):
4 Press Yes to delete the array or No to return to the previous
menu. In the Array Properties dialog box, press Delete again
and press Enter.
5 Press Esc to return to the previous menu.

Using the Scripting Features

To use the ACU scripting features, issue the command ACU with
one of the following required switches:
/P—Playback mode. This mode configures arrays and channel
I
settings from a specified script file.
/R—Record mode. This mode saves a controller's array and
I
channel configuration in a specified script file for later
playback.
On the ACU command line, you can also specify the name of a log
file to record the status of the playback or record operation. The
ACU records in the log any errors or warnings encountered.
When running in playback or record mode, ACU stores the status
of the playback or record operation in the MS-DOS variable
ERRORLEVEL on exit, allowing it to be used within an MS-DOS
batch file. See Error Handling on page B-32
error handling.
DOS Utilities
for more information on
B-18