Controller Commands - Adaptec RAID 21610SA Installation And User Manual

container set label {container} {string}
Assigns a new label to the array.
Parameters
{container}—ID of the array to which to assign a label.
{string}—Specifies the label to assign.
container show cache {container}
Displays caching parameters for an array.
Parameters
{container}—ID of the array whose associated cache
parameters to display.
container show failover [{container}]
Displays an array's assigned failover disks.
Parameters
{container}—ID of the array whose assigned failover disks to
display.
container unmirror {container}
Changes the RAID 1 (mirror) to a volume and frees the
redundant space.
Parameters
{container}—ID of the RAID 1 to unmirror.

Controller Commands

The following commands are used to display the status of a variety
of controller attributes and to perform such tasks as pausing or
resuming I/O, and enabling or disabling automatic failover.
controller details
Shows details about the open controller and software.
Command Line Interface (CLI)
C-25