Installing Adaptec Storage Manager On Windows - Adaptec RAID 21610SA Installation And User Manual

Installing Adaptec Storage Manager on Windows

Note: When installing on a FAT 32 file system, the folder being
installed is automatically hidden.
To install Adaptec Storage Manager – Browser Edition:
1 Verify that a supported browser is installed. See
Browsers on page 4-2
2 Insert the Adaptec installation CD and wait for the
executable to start the installation. If this does not occur, browse
the CD and click Autorun.
3 Click Install Adaptec Storage Manager – Browser Edition.
4 Click Next in the Install Shield window.
5 Read the license agreement. If you agree to its terms, click Yes. If
not, click No and terminate the installation.
The Select a Setup Type window appears. It provides three
types of installations: Typical, Compact, and Custom. See
Custom, and Compact Installations on page 4-2
6 Select a setup type and then click Next.
7 When you see the
8 When you see the
The Setup Status window shows progress using a scroll bar.
Before the scroll bar shows the installation is completed,
another window pops up indicating that a security certificate
has been generated.
9 Click OK.
The Root Certificate Store window appears.
10 Click Yes.
The security certificate generated during installation is added to
the Certificate Store. If you click No now, you will need to
install the certificate the first time you run Adaptec Storage
Manager.
Installing Adaptec Storage Manager – Browser Edition
for details.
Destination Folder
Setup Information
Supported
for details.
, click Next.
, click Next.
Autorun
Typical,
4-4