Adaptec RAID
Configuration Utility
In this Appendix...
Using the Array Configuration Utility
Using SATASelect
Using the Disk Utilities
Viewing the Event Log
The Adaptec RAID Configuration (ARC) utility is an embedded
BIOS utility that includes:
Array Configuration Utility (ACU)—Used to create, configure,
I
and manage arrays. Also used to initialize and rescan drives.
(Also available as a stand-alone DOS utility as described in
the Array Configuration Utility (ACU) on page
SATASelect—Used to change device and controller settings,
I
Disk Utilities—Used to format or verify media.
I
To run the ARC utility, press Ctrl+A when prompted by the
following message during system startup:
Press <Ctrl><A> for Adaptec RAID Configuration Utility
A
A-2
A-9
A-11
A-12
Using
B-11.)
A-1