Installing Adaptec Storage Manager On Linux - Adaptec RAID 21610SA Installation And User Manual

Installing Adaptec Storage Manager on Linux

Note: When performing this installation, keep in mind that Linux
is case sensitive.
To install Adaptec Storage Manager on a Linux computer and
configure the desired Internet browser:
1 Insert the Adaptec installation CD.
2 Install the software by typing:
sh <mount-point>/install.sh.
The <mount-point> differs among computers, but
/mnt/cdrom, /media/cdrom, or cdrom usually works.
A Welcome window appears.
3 Click Next.
The License Agreement window appears.
4 Read the license agreement. If you agree to its terms, click
Accept. If not, click Cancel and terminate the installation.
The Select a Setup Type window appears. It provides three
types of installations: Typical, Compact, and Custom. See
Custom, and Compact Installations on page 4-2
5 Select a setup type and click Next.
The Start Copying window appears.
6 Click Next.
The Running Non-Interactive Setup window displays the files
being loaded onto the system.
7 Click Next when prompted.
A Setup Complete window appears.
8 Click Complete.
A message window appears reminding you that any proxy
servers must be bypassed for the RAID management
application to work.
Installing Adaptec Storage Manager – Browser Edition
Typical,
for details.
4-8