Afu Error Handling - Adaptec RAID 21610SA Installation And User Manual

After using the VERSION command, you must restart the
computer upon completion of this command.
Default Switch Values
If you do not include the /C switch, the AFU returns a fatal error
message.
Examples
The following example displays version information about all
supported controllers.
A:\> AFU VERSION /C 0
Adaptec Flash Utility V4.0-0 B5749
(c)Adaptec Inc. 1999–2002. All Rights Reserved.
Version Information for Controller #0 (Adaptec 2410)
ROM: Build 5748 [VALID] Fri Sep 27 13:28:40 EDT 2002
A:\> AFU VERSION /C ALL

AFU Error Handling

Because the AFU can run without user interaction, it exits
immediately whenever an error is detected. For example, if the
AFU is unable to locate UFI files, it displays an error message and
exits. On exit, the AFU returns its exit status—zero for success or a
non-zero code for an error—in the DOS environment variable
ERRORLEVEL. If you run the AFU from within a DOS batch file, the
batch file can examine the AFU's exit status using the DOS
command IF ERRORLEVEL 1 to take action if the AFU exited with
an error.
DOS Utilities
B-10