6 When prompted, insert the driver disk and then select OK.
7 Follow the prompts to set up your preferred environment.
8 If you intend to install other third-party devices, proceed with
the installation of those devices. Otherwise, select Done.
9 Proceed with the Linux installation according to the Red Hat
instructions.
Adding the Driver to an Existing System
These driver installation instructions apply to both Red Hat and
SuSE Linux systems. To install the driver:
1 Ensure that the CD drive is mounted and then install the driver
RPM. This can be done by typing:
rpm -Uvh <mount-point>/packages/Linux/driver_package/
aacraid-*.i386.rpm
2 Run
,
fdisk
mkfs
, and create mount points for any new drives.
Installing the Driver
3-6