Adaptec Enclosure kit. It also describes how to install and hot-swap hard disk drives. Before You Begin Ensure you have these items from the Adaptec 2410SA Enclosure kit before beginning the installation: Adaptec 2410SA Enclosure drive chassis Four drive carriers...
2410SA Enclosure Kit HIG.fm Page 2 Thursday, October 23, 2003 1:20 PM Installing the Drive Carriers To install a drive carrier: 1 Mount a hard disk drive in a drive carrier and secure it with screws, as shown. 2 Insert the drive carrier into the drive slot and push firmly but gently until you can press the carrier handle down and click the release button into place.
Channel #1 Channel #2 Channel #3 Channel #4 The Adaptec 2410SA Enclosure kit contains labels that you can use to label the drive carriers as desired. About the Drive LEDs Each drive carrier has an Activity LED, which illuminates or flashes to indicate status.
Page 5
2410SA Enclosure Kit HIG.fm Page 4 Thursday, October 23, 2003 1:20 PM 2 Turn the drive chassis so that you can access the connectors on the rear panel. 3 Using the Figure as a guideline, connect the cables. Use gentle but firm pressure to fit the connectors together.
Page 6
5 Install the Adaptec Serial ATA RAID 2410SA controller, if you haven’t already. Refer to the printed Adaptec Serial ATA RAID 2410SA Quick Installation Guide, included in the kit, for detailed instructions.
Refer to the Adaptec Serial ATA RAID 2410SA Quick Installation Guide, included in the kit, for detailed instructions. Refer to the Adaptec Serial ATA RAID 2410SA Installation and User’s Guide for detailed information about using your Adaptec 2410SA Enclosure Kit.
2410SA Enclosure Kit HIG.fm Page 7 Thursday, October 23, 2003 1:20 PM 3 Mount a new drive in a drive carrier and secure it with screws, as shown in Step 1 on page 2. 4 Insert the drive carrier into the drive slot and push firmly but gently until you can press the carrier handle down and click the release button into place, as shown in Step 2 on page 2.
Page 10
2410SA Enclosure Kit HIG.fm Page 9 Thursday, October 23, 2003 1:20 PM Adaptec Customer Support If you have questions about installing or using your Adaptec product, check this document first—you will find answers to most of your questions here. If you need further assistance, use the support options listed below.
Page 11
German: To speak with a Technical Support Specialist, call +49 89 43 66 55 22, Monday to Friday, 9:00 to 17:00, CET. For support via e-mail, submit your question to Adaptec’s Technical Support Specialists at French: To speak with a Technical Support Specialist, call +49 89 43 66 55 33, Monday to Friday, 9:00 to 17:00, CET.
Page 12
2410SA Enclosure Kit HIG.fm Page 11 Thursday, October 23, 2003 1:20 PM Limited 3-Year Hardware Warranty 1. Adaptec, Inc. (“Adaptec”) warrants to the purchaser of this product that it will be free from defects in material and workmanship for a period of three (3) years from the date of purchase.
Page 13
(1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Adaptec, Inc. Adaptec Serial ATA RAID Tested to Comply With FCC Standards FOR HOME OR OFFICE USE...