Enclosure Commands - Adaptec RAID 21610SA Installation And User Manual

Enclosure Commands

The enclosure commands operate on enclosure management
devices that support Version 1.0 of the SAF-TE specification. If you
are not using an enclosure, the following commands will not be
available.
enclosure activate slot {enclosure} {slot}
Activates a device in a slot in the SAF-TE enclosure.
Parameters
{enclosure}—ID associated with the enclosure management
device on which to activate a device.
{slot}—Unit number associated with the slot.
enclosure identify slot [/stop={boolean}] {enclosure}
{slot}
Identifies a device in the enclosure.
Parameters
{enclosure}—ID associated with the enclosure management
device on which to identify a slot.
{slot}—Unit number associated with the slot.
Switches
/stop—Specifies whether to stop identifying the slot.
enclosure list [/all={boolean}] [/full={boolean}]
[{enclosure}]
Lists components for one or all enclosure devices.
Parameters
{enclosure}—ID associated with the enclosure management
device whose associated components to display.
Switches
/all—Lists all enclosures on the system.
/full—Displays detailed component information.
Command Line Interface (CLI)
C-34