Table of Contents
Advertisement
AEC-4412B/7412B User's Guide
SCSI Commands
Since the AEC-4412B/7412B does not support linked commands, the
control byte of each CDB must be zero. Also, since the LUN is gener-
ally specified by the Identify message, the LUN field in the CDB will
be ignored, unless an Identify message is not provided. The
AEC-4412B/7412B supports the following SCSI-2 commands:
Format unit
Inquiry
Mode Select 6
Mode Sense 6
Read 6 and Read 10
Read Capacity
Release
Request Sense
Reserve
Rezero Unit
Seek
Send Diagnostic
Start Stop Unit
Synchronize cache
Test Unit Ready
Verify
Write and Verify
Write 6 and Write 10
Table 4-2 through Table 4-26 describe the structure of the SCSI
commands.
Format Unit
This command is included for compatibility with host systems. It
does not affect the contents of the media.
4-2
AEC-4412B/7412B User's Guide
Stock Number: 511640-00 Rev B
Print Spec Number: 497358-00
Current Date: 3/19/98
Page: 4-2
ECN Date: 3/20/98
Advertisement
Table of Contents
