Table of Contents
Advertisement
2 When the RAID Type window appears, select the RAID level
you want to use. The default stripe size is selected
automatically; however you can select a different stripe size
value by highlighting the field and using the up and down
arrow keys to change the stripe size.
Note: Although you can change the stripe size, Adaptec
recommends using the default value, which has been selected
for optimum performance based on the type of disk array you
chose to create.
a When you are ready to proceed, select Ok.
b The Eligible Devices tab appears, as shown in
The list of eligible devices can be either individual hard
drives or previously created array groups. Array groups
appear in the list when you select RAID 0 and eligible array
groups exist.
Figure 2-10 Eligible Devices Tab
Storage Manager on ROM
Figure
2-10.
2-21
Advertisement
Table of Contents
