Table of Contents
Advertisement
Adaptec Storage Management Software User's Guide
Logical Configuration View
On the right side of the Logical Configuration View Window,
shown in Figure 3-3, are all the physical devices that are attached to
the RAID controllers.
Figure 3-3 Logical Configuration Window
On the left side of the window are the associated logical devices as
seen by the host computer.
Storage Manager displays the same icon for non-hard-drive
devices in both logical and physical views. Hard drives appear
either as individual drives or as members of arrays. In either case,
the drive or array is represented on the left side of the window as a
Logical Storage Unit (LSU). Arrays that make up a multilevel RAID
are displayed as RAID 1 or RAID 5 icons that appear between the
LSU icon on the left and the drives on the right.
Devices are displayed in order of device type, with all non-hard-
drive devices displayed first, followed by all hard drives not
assigned to an array, then hot spares, and finally all arrays by RAID
level.
3-8
Advertisement
Table of Contents
