What's Included; System Requirements; Management Consoles - Adaptec SCSI RAID 2010S Software User's Manual

Storage management raid controllers
Hide thumbs Also See for SCSI RAID 2010S:
Table of Contents

Advertisement

Adaptec Storage Management Software User's Guide

What's Included

The Adaptec SNMP software components are included on the
Adaptec RAID Installation CD. Specific components vary by
operating system.
The Windows components can be installed directly from the
CD-ROM or a from a disk you create from the CD-ROM. The
components are as follows:
Adaptec event logger
SNMP event logger extensions
Adaptec SNMP subagent
Adaptec MIB

System Requirements

The Adaptec SNMP software supports all Adaptec RAID
controllers and has the following system requirements:
The TCP/IP network protocol must be enabled on your system.
Refer to your operating system documentation for information
about installing the TCP/IP protocol.
The SNMP service for your operating system must be installed.

Management Consoles

The Adaptec SNMP agent conforms to the SNMP Version 1
specification. Adaptec has developed and tested this feature to
work with various operating systems that provide built-in SNMP
capability.
Windows supports controller management from an SNMP
management console.
A-6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scsi raid 2015sAsr-2015s

Table of Contents