Table of Contents
Advertisement
Adaptec Storage Management Software User's Guide
Making a Manual Connection
In the Manual Connections section of the Available Connections
window, there is one icon for each protocol that you configured in
the
file, and an icon for the system you are using (Local).
dptmgr.ini
To make a connection to a remote system, double-click the icon that
represents the protocol that your workstation uses to connect to
that system. (To select the system from which you are running
Storage Manager, select the Local icon).
For icons except Local, the Connection Information window is
displayed, as shown in
Figure 3-21 Connection Information Window - Manual
Enter the address, user name (if required), and password for the
server selected. Refer to
page 3-54
for more information.
When you click OK, Storage Manager attempts to connect to the
remote system. If the connection is successful, Storage Manager
scans the controller on the remote system. When the hardware scan
is complete, the Physical Configuration View window for the
remote system appears.
3-56
Figure
3-21.
Connecting Servers and Workstations on
Advertisement
Table of Contents
