Table of Contents
Advertisement
Adaptec Storage Management Software User's Guide
You must configure remote communication before it can be used.
For both workstations and servers, this is done by editing the
Storage Manager configuration file (dptmgr.ini). There may be
additional server configuration steps, depending on your
operating system. You must have physical connections between the
servers and client workstations.
Editing the Configuration File
Both the workstation and server communication engines use the
Storage Manager configuration file (dptmgr.ini). This file is
contained in the directory in which you installed Storage Manager.
The OPTIONS section of the file controls the behavior of the
communication server. To control the display of messages from the
server, change the Verbose parameter, Verbose=x, where x is:
0
No messages
Default—Basic messages, such as errors, connects, and
1
disconnects
2
More messages, including Option 1 messages with socket
numbers and TCP/IP addresses
All messages, including Option 2 messages and message
3
tracing
The MODULES section of the file tells the communication server
which protocol setting you want to use for communication.
[MODULES]
TCP
3-52
Specify as many as needed
Communication server uses TCP protocol
Advertisement
Table of Contents
