Adaptec Storage Management Software User's Guide
Note: The availability of the various buttons depends on the
current configuration and state of the array.
The toolbar at the bottom of the Array Group Information window
contains the following buttons:
Event Log
I/O Stats
Verify
Expand
Name
Configure
Print
Build
Rebuild
Stop Bld
Stop Vfy
Creating an Array Group
To create an array group, follow these steps:
3-14
Displays the activity log of the RAID system. For
more information, see
Displays the log of the array's I/O activity. For more
information, see
Starts the process of checking the current status and
operability of the RAID array. For more information,
see
page
3-43.
Windows XP, Windows 2000 and Windows NT only—
Allows setting and checking the parameters of the
RAID controller. For more information, see
3-19.
Allows entering or changing the name to be shown
for this RAID array. This does not affect the LSU of
the array. For more information, see
Allows changing the configuration of the array.
Prints the configuration file of the selected RAID
array.
Arrays that have a build pending display this
button.
Redundant arrays that have a failed drive show this
button.
Arrays that are building or rebuilding show a Stop
Bld button.
Arrays running a Verify operation show this button.
page
3-32.
page
3-45.
page
page
3-21.