.
Figure 3-1 Storage Manager Setup Window
Running Storage Manager
You can run Storage Manager in one of the following ways:
Locally—On the same computer that contains the RAID
■
controller and drives.
Remotely—Across a TCP/IP network, you can view and
■
configure servers from remote locations.
Using Storage Manager Locally
Storage Manager scans for RAID controllers installed on the
computer on which it is run. If one or more controllers are found,
the storage subsystem hardware configuration is displayed.
Using Storage Manager Remotely
Host systems can be viewed and configured across a TCP/IP
network from a client system running Storage Manager.
Storage Manager
3-5