Table of Contents
Advertisement
Adaptec Storage Management Software User's Guide
Linux
The Linux communication server is installed during the Storage
Manager software install process. The server module is copied to
and loads automatically.
/usr/dpt
A valid user name and password are required to access a Linux
system from a remote Storage Manager client. The user ID must
have root privileges on the host system.
Connecting Servers and Workstations
The Storage Manager client must have a physical connection to
connect to a remote server.
Servers and workstations communicating by TCP/IP must be
connected by a local area network (LAN) or the Internet. Some
operating systems may require additional TCP/IP protocol
configuration before use. Refer to your operating system
documentation for more information.
The client workstation specifies the TCP/IP address of the server,
along with a user name and password as required by the server.
3-54
Advertisement
Table of Contents
