Table of Contents
Advertisement
Storage Manager
Connecting to Remote Systems
Select Communication > Make Connection to use Storage
Manager to manage the controller in a remote server system using
the Remote Communication feature. This menu item displays the
Available Connections window as shown in
Figure
3-20.
You may alternatively use the IP=address command line
parameter when you start Storage Manager. This parameter causes
Storage Manager to connect to the remote system at the specified IP
address instead of the default Local connection.
Figure 3-20 Available Connections WIndow
From this window, you can make a connection either by selecting
one of the available protocols under Manual Connections and
entering the name, address, and password of the server; or by
selecting an entry under Custom Connections. Custom
Connections are those for which you previously stored address
information in the Phonebook (see
Using the Phonebook on
page 3-57
for more information).
3-55
Advertisement
Table of Contents
