Table of Contents
Advertisement
4 Select Action > Flash HBA. The Source File Browser window
appears, as shown in
20103A0H.ima
-A:
2 100320B.IMA
I20BIOS.160
I 2OBIOS.134
SMOR0031.112
S MOR0031.112
#0 2 100S:
-
#0 2 100S:
Figure 2-13 Source File Browser Window
5 In the Source File Browser window, select the drive that
contains the image files. Press Enter to expand the drive listing.
6 Highlight the image file you want to use and select Ok to
update the controller flash ROM. After the controller reads the
image, it displays the version number of the component you
selected. Select Yes to confirm. A progress indicator appears
showing of the flash operation.
If the operation does not complete successfully, refer to the
procedures for recovering from an incomplete or failed flash ROM
upgrade in the Troubleshooting section of the Adaptec SCSI RAID
Installation Guide.
Figure
2-13.
Storage Manager on ROM
Select a source for flash
Select a source for flash
Image using the browser.
image using the browser.
Select OK button to start
Select OK button to start
flash procedure.
flash procedure.
Ok
Ok
Cancel
Cancel
2-27
Advertisement
Table of Contents
