Connecting The Led Connector - Adaptec 2940UW User Manual

Connecting the LED Connector

(Optional feature) Most computers have an LED disk activity light on
the front panel. You may choose to disconnect the cable from the
LED connector on the motherboard and connect it to the LED
connector on the SCSI card. The LED on the front panel of the
computer will light whenever there is activity on the SCSI bus (see
Figure 1).
Note:
If you are using non-SCSI disk drives (for example,
IDE), you may not want to connect your computer's LED to
the SCSI card, since the LED will no longer indicate non-
SCSI disk activity.
LED Connector
on Host Adapter
pin 1
Figure 1. Connecting the LED Cable to the LED Connector
Using the SCSI Card 2940UW Pro and SCSI Devices
pin 1
LED Cable
from Motherboard
2-pin LED
Cable
11