Metrohm 883 Basic IC plus Manual page 34

3.8 Connecting the eluent bottle
26
￭￭￭￭￭￭￭￭
6 Mounting the adsorber tube
NOTICE
Depending on the eluent used, the adsorber tube (6.1609.000)
must be filled differently:
For alkaline eluents or eluents with a low buffer capacity: first a
￭
little cotton, then with CO
For all other eluents: only with cotton.
￭
Remove the plastic cover from the large opening of the adsorber
￭
tube. Fill the adsorber tube and close it again using the plastic
cover.
Insert the adsorber tube into the bottle cap's large opening. Fas-
￭
ten it to the bottle cap using the SGJ clip (6.2023.020).
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
adsorber material.
2
883 Basic IC plus