Commtest Instruments vb Series Instrument Reference Manual page 73

Note: When you set the parameters for a measurement you cannot
choose settings that conflict with the type of measurement you are
trying to create e.g. if you are measuring acceleration you cannot
select a current sensor. If you try to take the measurement the
instrument will display an 'Invalid Combination' message and no
measurement will be taken.
Changing parameters once measuring has begun
Measurement parameters are normally chosen before taking a
measurement but can also be changed once measuring is underway.
•
While the hardware is stabilizing or the instrument is
collecting data the hourglass icon will be displayed. During
this time, pressing keys 1-9 will access the associated Set
Parameters Menu item directly.
•
Make any required changes then press
measuring.
64 Section 4: Manual Setup Measurement Parameters
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
to resume