Reviewing Data During A Route - Commtest Instruments vb Series Instrument Reference Manual

Notes:
•
In the Auto Route Menu you can press
notes for the measurement location.
•
Press
spectra/waveforms.
•
Press
location.
•
Press
menu that lists these options.

Reviewing Data During a Route

When performing a route you can review any of the recordings you
have just taken.
Note: You can only review recordings from the current route using
this method (if you wish to review recordings taken on a previous
route, see Reviewing Recordings on page 84).
•
Press
can return to any previous location by pressing this key
repeatedly.
•
When the route location you wish to review is displayed
press
then press
92 Section 6: Using Routes
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
to view/edit the display options for recorded
to view the parameter sets at this measurement
from the Auto Route Menu to open a pop-up
to return to the location you wish to review. You
(alternatively press
Details).
to view or edit
to display a pop-up menu