Off-Route Recordings - Commtest Instruments vb Series Instrument Reference Manual

•
Use
select it and return to the route. The first location at this
machine is displayed.
•
To move forwards or backwards by 10 machines press
+
beginning or end of the machine list.

Off-route Recordings

When collecting data, you may decide to take additional
measurements that are not part of the route sequence. This might be
done if a machine's vibration pattern does not look as expected when
taking the measurement.
•
With the Auto Route screen displayed press
temporarily step out of the route.
•
The Select Machine Menu will display. From here you can
set up the location and parameters of the extra
measurement.
•
Take the measurement as normal. Once recording is
complete you will be returned to the Select Parameter Set
Menu where you can review the recording.
•
Press
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
or to highlight a machine then press
or + . Use
to return to the route.
or to move to the
Section 6: Using Routes
to
to
95