Commtest Instruments vb Series Instrument Reference Manual page 44

•
Press
and use
•
Press
Fmax. This can be done in two ways:
OR
•
•
Once the Fmax is set press
menu then press
When a measurement has been taken it can be analyzed
immediately on the instrument (see Analyzing Measurements on
page 55) or stored for later analysis (see Storing Measurements on
page 54).
Setting your own parameters
Option
your own settings instead of the factory defaults. See Custom Setups
(page 57) for more information.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
to display the Set Demodulation Bandwidth Menu
or
to return to the quick setup menu and set the
Press to display the Machine Running Speed Menu
then use the number keys to enter an RPM value. The
Fmax will be set to 40 x the RPM (or rounded up to the
closest value).
Press to display the Set Fmax Menu and use
to select a value.
Custom Setup allows you to customize this menu to use
Section 3: Onsite Analysis - Measurement Menu
to select a value.
to return to the quick setup
to take the measurement.
or
35