Commtest Instruments vb Series Instrument Reference Manual page 102

This opens the Select Parameter Set Menu. The review option is
displayed in the bottom right corner.
•
Press
•
When you have finished reviewing press
to the previous menu.
•
Press
to the location where you left the route and the next
unrecorded location will be displayed.
•
You can now press
normal or repeat the above procedure if you wish to review
more recordings.
Note: If you want to review each recording after you take it, a more
efficient method is to use Halt After Recording from the Options
Menu. If this option is turned ON then the spectrum or waveform
remains on the display after recording (see Halt After Recording on
page 172 for more information).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
to review the recording.
to return to the Auto Route. You will be returned
and continue to record the route as
again to return
Section 6: Using Routes 93