Erasing A Machine - Commtest Instruments vb Series Instrument Reference Manual

Erasing a Machine

Erasing a machine will remove all its points, directions and
recordings permanently from memory.
Note: Any parameter sets used by the machine will not be removed
but will remain in the Select Parameter Set Menu so they can be
applied to other recordings.
•
From the Main Menu press
•
Press
press
•
If the machine has recordings (as indicated by the
you will be prompted to press
You must delete any data from the machine before the
machine can be erased.
•
Once the machine has no data you will be prompted to press
To cancel the erasure
•
To cancel the pop-up window and not erase an item, press
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
or to highlight the machine to be erased then
+ to erase the machine.
or simply wait to allow the window to disappear by itself.
+ to erase the data.
Section 8: Creating Machines 117
icon)