Installation Considerations - Bosch RADION B810 Installation Manual

RADION receiver SD
Terminal block
Wall and cover tamper
switch
Frequency
Tab. 16.20: Specifications
Single EOL Resistor Option
Use a 2.2 kￚΩ EOL resistor. Refer to the diagram below.
Figure 16.1: Single EOL resistor option
1 ￚ Normally-open (NO)
2 ￚ Normally-closed (NC)
3 ￚ Input disabled – no contact
16.1

Installation considerations

You have a variety of installation options to consider when
installing the device. You must acknowledge the unique
installation approach prior to installation. Some installation
considerations include:
Bosch Security Systems B.V.
1
RADION universal transmitter | en
For connecting other dry contact
devices such as another magnetic
reed switch.
Transmits a tamper signal when
someone removes the device from its
base or pulls it away from the wall.
433.42 MHz
2
3
2020.05 | 13 | F.01U.261.834
81